Items Included:

1 - Plastic Speedring
1 - Silver Lined Softbox Cloth
1 - Internal Diffusion Screen
4 - Rods of Equal Length

Step 1

Place the plastic speedring on a flat surface round side facing down. The square side should be facing upward. (diagram 1)

Step 2

Take the silver lined cloth from the elastic center band silver side up and place over the square part of the speedring. (diagram 2)

The cloth should be between the two thumbscrews and square body of the speedring. (diagram 3) (diagram 4)

Step 3

Next rotate the cloth around so the edges of the square box align with the square edges of the speedring. (diagram 5)

Slide one rod under each of the (4) four Velcro pieces located in the middle of the silver lined section of the cloth softbox. (diagram 6) (Diagram 7)

Then place one rod in each of the corners of the speedring (diagram 6)

Step 4

Velcro the inner small white baffle into the silver lined softbox. (diagram 8)

Step 5

Locate the rod pocket on the top of the large diffusion panel. (diagram 9)

Insert the first rod into the pocket. (diagram 10) Attach the Velcro diffusion panel into the corner of the silver lined cloth. (diagram 11)

The rods will bend greatly (similar to a tent pole). Work your way around the softbox to the next corner. (diagram 12) (diagram 13)
Then grab the next rod and gently insert the rod into the sleeve on the diffusion panel. Repeat Until Complete.